Cisco BGP Multipath(maximum-paths) Configuration

Cisco BGP Multipath(maximum-paths) Configuration

• Topology
  
  
  
  
• Configuration Settings Overview

  BGP Configuration
  
  R1 : maximum-paths 2
  
  Routing Table (excerpt from show command below)
  
  R1#sh ip route
  B     192.168.7.0/24 [20/0] via 192.168.3.2  ---> maximum-paths 2
                       [20/0] via 192.168.2.2  ---> maximum-paths 2
  
  R1#sh bgp ipv4 unicast
       Network      Next Hop
   *m  192.168.7.0  192.168.2.2  ---> maximum-paths 2
   *>               192.168.3.2  ---> maximum-paths 2
  

• Dynagen Config File / Router Config

  (1)  Dynagen .net file
  
  (2)  R1
  
  (3)  R2
  
  (4)  R3
  
  (5)  R4
  
  (6)  R5
  

• show command

  R1 : sh bgp ipv4 unicast
       sh ip route
  
  (1)  R1