Cisco Routing between VRFs with Trunk and OSPF Configuration

Cisco Routing between VRFs with Trunk and OSPF Configuration

Topology

(*) Route leaking between Global Routing Table and VRF

(*) Route leaking Between VRFs using BGP
Configuration Settings Overview
1. Create VRF1, VRF2 in R1.
2. Dot1q Trunk between R1 and R2.
3. R2 Sub Interface Configuration
  F0/0.10 : encapsulation dot1Q 10
  F0/0.20 : encapsulation dot1Q 20
  F0/0.30 : encapsulation dot1Q 30
4. OSPF
  OSPF Enable : R1 Global, R2 Global, R1 VRF1, R1 VRF2

Dynagen Config File / Router Config

1. Dynagen .net file

2. R1

3. R2

4. CUST1

5. CUST2

6. HOSTA

R1, R1-VRF1, R1-VRF2 Routing Table

sh ip route vrf VRF1
sh ip route vrf VRF2
sh ip route

1. R1 show command

Dynalconf HOME